pico_bootrom

Macros
#define	ROM_TABLE_CODE(c1, c2)   ((c1) | ((c2) << 8))
	Return a bootrom lookup code based on two ASCII characters. More...

Functions
static uint32_t	rom_table_code (uint8_t c1, uint8_t c2)
	Return a bootrom lookup code based on two ASCII characters. More...
void *	rom_func_lookup (uint32_t code)
	Lookup a bootrom function by code. More...
void *	rom_data_lookup (uint32_t code)
	Lookup a bootrom address by code. More...
bool	rom_funcs_lookup (uint32_t *table, unsigned int count)
	Helper function to lookup the addresses of multiple bootrom functions. More...
static __force_inline void *	rom_func_lookup_inline (uint32_t code)
	Lookup a bootrom function by code. This method is forcibly inlined into the caller for FLASH/RAM sensitive code usage. More...
static void	reset_usb_boot (uint32_t usb_activity_gpio_pin_mask, uint32_t disable_interface_mask)
	Reboot the device into BOOTSEL mode. More...

Detailed Description

Access to functions and data in the RP2040 bootrom

This header may be included by assembly code

Macro Definition Documentation

ROM_TABLE_CODE

#define ROM_TABLE_CODE	(		c1,
			c2
	)		((c1) | ((c2) << 8))

Return a bootrom lookup code based on two ASCII characters.

These codes are uses to lookup data or function addresses in the bootrom

Parameters

c1	the first character
c2	the second character

Returns

the 'code' to use in rom_func_lookup() or rom_data_lookup()

Function Documentation

reset_usb_boot()

static void reset_usb_boot ( uint32_t  usb_activity_gpio_pin_mask, uint32_t  disable_interface_mask  )

inlinestatic

Reboot the device into BOOTSEL mode.

This function reboots the device into the BOOTSEL mode ('usb boot").

Facilities are provided to enable an "activity light" via GPIO attached LED for the USB Mass Storage Device, and to limit the USB interfaces exposed.

Parameters

usb_activity_gpio_pin_mask	0 No pins are used as per a cold boot. Otherwise a single bit set indicating which GPIO pin should be set to output and raised whenever there is mass storage activity from the host.
disable_interface_mask	value to control exposed interfaces 0 To enable both interfaces (as per a cold boot) 1 To disable the USB Mass Storage Interface 2 To disable the USB PICOBOOT Interface

rom_data_lookup()

void* rom_data_lookup

(

uint32_t

code

)

Lookup a bootrom address by code.

Parameters

code

the code

Returns

a pointer to the data, or NULL if the code does not match any bootrom function

rom_func_lookup()

void* rom_func_lookup

(

uint32_t

code

)

Lookup a bootrom function by code.

Parameters

code

the code

Returns

a pointer to the function, or NULL if the code does not match any bootrom function

rom_func_lookup_inline()

static __force_inline void* rom_func_lookup_inline ( uint32_t  code )

static

Lookup a bootrom function by code. This method is forcibly inlined into the caller for FLASH/RAM sensitive code usage.

Parameters

code

the code

Returns

a pointer to the function, or NULL if the code does not match any bootrom function

rom_funcs_lookup()

bool rom_funcs_lookup	(	uint32_t *	table,
		unsigned int	count
	)

Helper function to lookup the addresses of multiple bootrom functions.

This method looks up the 'codes' in the table, and convert each table entry to the looked up function pointer, if there is a function for that code in the bootrom.

Parameters

table	an IN/OUT array, elements are codes on input, function pointers on success.
count	the number of elements in the table

Returns

true if all the codes were found, and converted to function pointers, false otherwise

rom_table_code()

static uint32_t rom_table_code ( uint8_t  c1, uint8_t  c2  )

inlinestatic

Return a bootrom lookup code based on two ASCII characters.

These codes are uses to lookup data or function addresses in the bootrom

Parameters

c1	the first character
c2	the second character

Returns

the 'code' to use in rom_func_lookup() or rom_data_lookup()