II.5.3 Reassembler

"mode AC0 = SYN = 0 is not supported"
   In the JEDEC file the bits AC0 and SYN are set to 0. This mode
   is not supported by GALer.


"Pin xx: pin name defined twice"
   A pin name is used for more than one pin.


"Pin xx: illegal character"
   Legal characters are  : digits, letters and the '/'
   Illegal characters are: Space, #, *, ...


"Pin xx: no pin name found"
   There is no name for the pin xx defined.


"Pin xx: VCC/GND at wrong pin"
   VCC and GND must be the pin names for the VCC and GND pin of the GAL.


"Pin xx: illegal use of '/'"
   Usage of the negation character: /pinname
   Illegal:  pinname/, /, //pinname etc.


"Pin xx: GND expected"
   Pin 10 of GAL16V8 respectively pin 12 of GAL20V8 must be defined as GND.


"Pin xx: VCC expected"
   Pin 20 of GAL16V8 respectively pin 24 of GAL20V8 must be defined as VCC.


"Pin xx: AR is not allowed as pin name"
   When using a GAL22V10, AR is a keyword which is not allowed as pin name.

"Pin xx: SP is not allowed as pin name"
   When using a GAL22V10, SP is a keyword which is not allowed as pin name.