// Copyright (c) 2009 - 2026 kio@little-bat.de
// BSD-2-Clause license
// https://opensource.org/licenses/BSD-2-Clause

#include "ZxPrinter.h"


//    Wos:
//    Peripheral: ZX Printer.
//    Port: ---- ---- ---- -0--
//
//  The ZX Printer is addressed in the same way as the Alphacom 32 and Timex TS2040, with the following notes:
//    D0 and D7 are both latched so that they remain high until the computer writes something to the printer. So even if
//    you don't make use of the information you've read in, you should output an instruction (with appropriate data) to
//    reset the latches until the next signal. These bits may be in either state on switch on, and aren't affected by
//    the feed button. The paper detect signal is also used internally by the printer to make sure that the styli stop
//    off the paper. Note that if power is applied to the stylus, the paper signal will go high even if the printer is
//    between scans, so the stylus must be turned off before attempting to detect the edge of the paper.


namespace zxsp
{

#define o_addr "---- ---- ---- -0--"
#define i_addr nullptr

ZxPrinter::ZxPrinter(Machine* m) : Printer(m, isa_ZxPrinter, external, o_addr, i_addr) {}

} // namespace zxsp