Release Notes for STM32F1xx CMSIS

Copyright © 2016 STMicroelectronics

License

This software component is licensed by ST under BSD 3-Clause license, the “License”; You may not use this component except in compliance with the License. You may obtain a copy of the License at:
https://opensource.org/licenses/BSD-3-Clause

Update History

Main Changes

  • Protect Vector table modification following SRAM or FLASH preprocessor directive by a generic preprocessor directive : USER_VECT_TAB_ADDRESS
  • SystemInit(): update to don’t reset RCC registers to its reset values.
  • TIM:
    • Remove unused IS_TIM_SYNCHRO_INSTANCE() assert macro
  • I2S:
    • Add missing I2SCFG and I2SPR bits difinitions for STM32F101xE and STM32F101xG

Main Changes

  • Fix MISRA C 2012 Compilation errors: update to use “UL” postfix for bits mask definitions(_Msk) and memory/peripheral base addresses
  • Fix wrong initialization value for “SystemCoreClock” in System_stm32f1xx.c file
  • Update gcc linker file template to be aligned with AC6 linker file template
  • stm32f1xx.h
    • Align ErrorStatus typedef to common error handling
  • TIM:
    • Update IS_TIM_SLAVE_INSTANCE() macro to add reference to TIM9 instance
  • SDMMC:
    • Remove SDIO_TypeDef() structure, SDIO_BASE define and SDIO Bits definitions : feature not available on all devices except STM32F103xE and STM32F103xG
  • USB:
    • Add new PCD/HCD macros:
      • IS_PCD_ALL_INSTANCE()
      • IS_HCD_ALL_INSTANCE()
  • SPI:
    • Add new SPI_CRC_ERROR_WORKAROUND_FEATURE define to enable SPI CRC workaround feature for STM32F101xE/STM32F103xE devices

Main Changes

  • Add missing IS_TIM_SYNCHRO_INSTANCE macro definition to check TIM SYNCHRO feature instance support.

Main Changes

  • Use _Pos and _Mask macros for all Bit Definitions
  • Remove Core-CM3 bit definitions from CMSIS devices drivers: duplicated with bit definitions in core_cm3.h.
  • General updates in header files to support LL drivers
    • Remove TIM SMCR OCCS and TIM CCER CC4NP bit definitions
    • Add new USART defines: USART_CR1_OVER8 and USART_CR3_ONEBIT
    • Add I2C_DR_DR bit definition
    • Add new I2C macros: IS_SMBUS_ALL_INSTANCE
    • Add new LL I2S defines: SPI_I2S_SUPPORT and I2S2_I2S3_CLOCK_FEATURE
    • Rename DAC instance to DAC1
    • Rename PWR_CR_PLS_XXX to PWR_CR_PLS_LEVX
    • Add RCC LL defines
      • RCC_HSE_MIN
      • RCC_HSE_MAX
      • RCC_MAX_FREQUENCY
      • RCC_PLL_SUPPORT
      • RCC_PLLI2S_SUPPORT
    • Add new TIM macros to check TIM feature instance support:
      • IS_TIM_COUNTER_MODE_SELECT_INSTANCE()
      • IS_TIM_ADVANCED_INSTANCE
      • IS_TIM_ETR_INSTANCE
      • IS_TIM_HALL_SENSOR_INTERFACE_INSTANCE
      • IS_TIM_32B_COUNTER_INSTANCE
      • IS_TIM_BREAK_INSTANCE()
      • IS_TIM_CCXN_INSTANCE()
      • IS_TIM_REPETITION_COUNTER_INSTANCE()
      • IS_TIM_COMMUTATION_EVENT_INSTANCE()

Main Changes

  • Add _Pos and _Msk defines to be used with _VAL2FLD(field, value) and _FLD2VAL(field, value).
    • The previous naming are kept for backward compatibility.
  • RCC: Add define RCC_CFGR_MCOSEL for compatibility across all STM32 series.
  • ADC: Add define ADC_MULTIMODE_SUPPORT for devices supporting the ADC multimode feature.
  • ADC: Add define ADC_SR_EOS and ADC_SR_JEOS for compatibility accross all STM32 series.
  • stm32f1xx.h: Replace __STM32F1xx_CMSIS_DEVICE_VERSION_MAIN by __STM32F1_CMSIS_VERSION_MAIN for MISRA compliancy on define length name.
  • Add APBPrescTable constant to list APB prescalers values.
  • Add FLASHSIZE_BASE for the FLASH Size register base address.
  • Add UID_BASE for the unique device ID register base address.

Main Changes

  • FLASH: Add FLASH_OBR_DATA0 and FLASH_OBR_DATA1 for FLASH_OBR register.
  • WWDG: Align bit name across all STM32 families.
    • WWDG_CR_T0 renmaed to WWDG_CR_T_0.
    • WWDG_CFR_W0 renamed to WWDG_CFR_W_0.
    • WWDG_CFR_WDGTB0 renamed to WWDG_CFR_WDGTB_0.
    • WWDG_CFR_WDGTB1 renamed to WWDG_CFR_WDGTB_1.
  • Interrupt: Add HardFault_IRQn with value -13.
  • EXTI:: Align bit name across all STM32 families.
    • EXTI_IMR_MR0 renamed to EXTI_IMR_IM0.
    • EXTI_EMR_MR0 renamed to EXTI_EMR_EM0.
    • EXTI_RTSR_TR0 renamed to EXTI_RTSR_RT0.
    • EXTI_FTSR_TR0 renamed to EXTI_FTSR_FT0.
    • EXTI_SWIER_SWIER0 renamed to EXTI_SWIER_SWI0.
    • EXTI_PR_PR0 renamed to EXTI_PR_PIF0.
    • Aliases are created for backward compatibilities.
  • USB OTG: Remove USB_OTG_GCCFG_NOVBUSSENS from USB_OTG_GCCFG as this feature is not present in F1 devices.
  • USB_OTG: Remove USB_OTG_GCCFG_I2CPADEN from USB_OTG_GCCFG as this feature is not present in F1 devices.
  • ADC: Add the notion of common instance for compatibility with other STM32 families.

Main Changes

  • Remove __IO or __I on constant table declaration (AHBPrescTable in system_stm32f1xx.c) due to issue with mbed C++ code. The table content was filled with random value at initialization phase.
  • uint8_t alignment done on CMSIS CRC registers structure.
  • Removing definition of FLASH_WRP1_WRP1, FLASH_WRP1_nWRP1, FLASH_WRP2_WRP2, FLASH_WRP2_nWRP2, FLASH_WRP3_WRP3 and FLASH_WRP3_nWRP3 for product STM32F101x6, STM32F102x6 and STM32F103x6. Those defines are not applicable to those products.

Main Changes

  • Update based on STM32Cube specification
  • This version has to be used only with STM32CubeF1 based development

Main Changes

  • Update startup files for EWARM toolchain to cope with compiler enhancement of the V7.10 version.

Main Changes

  • stm32f10x.h
    • Change #define FLASH_ACR_LATENCY ((uint8_t)0x03) by #define FLASH_ACR_LATENCY ((uint8_t)0x07)
    • Remove ‘,’ from #define DMA_CCR7_PSIZE , ((uint16_t)0x0300)

Main Changes

  • All source files: license disclaimer text update and add link to the License file on ST Internet.

Main Changes

  • Update directory structure to be compliant with CMSIS V2.1
  • All source files: update disclaimer to add reference to the new license agreement
  • stm32f10x.h
    • Add define for Cortex-M3 revision __CM3_REV
    • Allow modification of some constants by the application code, definition of these constants is now bracketed by #if !defined. The concerned constant are HSE_VALUE, HSI_VALUE and HSE_STARTUP_TIMEOUT
    • Add missing bits definition for DAC CR register
    • Add missing bits definition for FSMC BTR1, _BTR2__, BTR3, BWTR1, BWTR2, BWTR3 and BWTR4 registers
    • Definition for Flash keys moved from stm32f10x_flash.c to stm32f10x.h
  • V3.5.0 (based CMSIS V1.3) vs. V3.6.0 (based on CMSIS V2.1) compatibility update
    • Due to the directory structure difference between CMSIS V1.3 and V2.1, when migrating a project based on STM32F10x drivers V3.5.0 to V3.6.0 you need to perform the following update:
      • Rename ADC1_COMP_IRQn to ADC1_IRQn
      • In the compiler preprocessor, remove CortexM3 CMSIS include path. CortexM3 CMSIS files are included by default in your development toolchain
      • Remove core_cm3.c file (if it is used). Almost of CortexM3 CMSIS_ function are provided as intrinsic by the compiler
      • In the compiler preprocessor, update path of _STM32F10x CMSIS include files from Libraries332F10x to Libraries32F10x
      • In the project settings, update path of startup_stm32f10x_xx.s file from Libraries332F10x”Compiler” to Libraries32F10x”Compiler” where, “Compiler” refer to arm, gcc_ride7, iar, TASKING or TrueSTUDIO

Main Changes

  • stm32f10x.h and startup_stm32f10x_hd_vl.s files: remove the FSMC interrupt definition for STM32F10x High-density Value line devices.
  • system_stm32f10x.c file provided within the CMSIS folder.

Main Changes

  • General
    • Add support for STM32F10x High-density Value line devices.
  • STM32F10x CMSIS Device Peripheral Access Layer
    • STM32F10x CMSIS Cortex-M3 Device Peripheral Access Layer Header File: stm32f10x.h
      • Update to support High-density Value line devices
        • Add new define STM32F10X_HD_VL
        • RCC, AFIO, FSMC bits definition updated
      • All STM32 devices definitions are commented by default. User has to select the appropriate device before starting else an error will be signaled on compile time.
      • Add new IRQs definitions inside the IRQn_Type enumeration for STM23 High-density Value line devices.
      • “bool” type removed.
  • STM32F10x CMSIS Cortex-M3 Device Peripheral Access Layer System Files: system_stm32f10x.h and system_stm32f10x.c
    • “system_stm32f10x.c” moved to to “STM32F10x_StdPeriph_Template” directory. This file is also moved to each example directory under “STM32F10x_StdPeriph_Examples”.
    • SystemInit_ExtMemCtl() function: update to support High-density Value line devices.
    • Add “VECT_TAB_SRAM” inside “system_stm32f10x.c” to select if the user want to place the Vector Table in internal SRAM. An additional define is also to specify the Vector Table offset “VECT_TAB_OFFSET”.
  • STM32F10x CMSIS startup files:startup_stm32f10x_xx.s
    • Add three startup files for STM32 High-density Value line devices: startup_stm32f10x_hd_vl.s

Main Changes

  • General
    • Add support for STM32F10x XL-density devices.
    • Add startup files for TrueSTUDIO toolchain
  • STM32F10x CMSIS Device Peripheral Access Layer
    • STM32F10x CMSIS Cortex-M3 Device Peripheral Access Layer Header File: stm32f10x.h
      • Update to support XL-density devices
        • Add new define STM32F10X_XL
        • Add new IRQs for TIM9..14
        • Update FLASH_TypeDef structure
        • Add new IP instances TIM9..14
        • RCC, AFIO, DBGMCU bits definition updated
      • Correct IRQs definition for MD-, LD-, MD_VL- and LD_VL-density devices (remove comma “,” at the end of enum list)
    • STM32F10x CMSIS Cortex-M3 Device Peripheral Access Layer System Files: system_stm32f10x.h and system_stm32f0xx.c
      • SystemInit_ExtMemCtl() function: update to support XL-density devices
      • SystemInit() function: swap the order of SetSysClock() and SystemInit_ExtMemCtl() functions.
    • STM32F10x CMSIS startup files:
      • add three startup files for STM32 XL-density devices: startup_stm32f10x_xl.s
      • startup_stm32f10x_md_vl.s for RIDE7: add USART3 IRQ Handler (was missing in previous version)
      • Add startup files for TrueSTUDIO toolchain

Main Changes

  • General
    • STM32F10x CMSIS files updated to CMSIS V1.30 release
    • Directory structure updated to be aligned with CMSIS V1.30
    • Add support for STM32 Low-density Value line (STM32F100x4/6) and Medium-density Value line (STM32F100x8/B) devices.
  • CMSIS Core Peripheral Access Layer
  • STM32F10x CMSIS Device Peripheral Access Layer
    • STM32F10x CMSIS Cortex-M3 Device Peripheral Access Layer Header File: stm32f10x.h
      • Update the stm32f10x.h file to support new Value line devices features: CEC peripheral, new General purpose timers TIM15, TIM16 and TIM17.
      • Peripherals Bits definitions updated to be in line with Value line devices available features.
      • HSE_Value, HSI_Value and HSEStartup_TimeOut changed to upper case: HSE_VALUE, HSI_VALUE and HSE_STARTUP_TIMEOUT. Old names are kept for legacy purposes.
    • STM32F10x CMSIS Cortex-M3 Device Peripheral Access Layer System Files: system_stm32f10x.h and system_stm32f10x.c
      • SystemFrequency variable name changed to SystemCoreClock
      • Default SystemCoreClock is changed to 24MHz when Value line devices are selected and to 72MHz on other devices.
      • All while(1) loop were removed from all clock setting functions. User has to handle the HSE startup failure.
      • Additional function void SystemCoreClockUpdate (void) is provided.
    • STM32F10x CMSIS Startup files: startup_stm32f10x_xx.s
      • Add new startup files for STM32 Low-density Value line devices: startup_stm32f10x_ld_vl.s
      • Add new startup files for STM32 Medium-density Value line devices: startup_stm32f10x_md_vl.s
      • SystemInit() function is called from startup file (startup_stm32f10x_xx.s) before to branch to application main. To reconfigure the default setting of SystemInit() function, refer to system_stm32f10x.c file
  • GNU startup file for Low density devices (startup_stm32f10x_ld.s) is updated to fix compilation errors.